PUNCTURE DOES NOT SEAL

When a Puncture Does Not Seal Properly, Check for the
Following:

Installing the recommended amount of Ultraseal will not create a vibration or balance problem. Pre-existing balance or vibration problems should be corrected prior to the installation of Ultraseal, as they may be amplified.

Excessive wheel vibrations can pull Ultraseal off the inner tread surface and may actually increase the intensity of the vibration.

It is important to recognize that not all vehicle vibrations are related to tire balance. Many originate from other sources such as steering, suspension, shock absorbers and tire irregularities. Below are some causes for…

a) Improper tube size for tire.

b) Lack of Ultraseal product in the tire.

c) Puncturing object has been in tire for over a month.

d) Puncturing object or puncture itself is larger than 1/4" (6.5mm) diameter.

e) Rips, tears or cord damage inside tire.

f) Shifted belts.

g) Sidewall puncture.

h) Stretched rubber, sometimes found in over-inflated tires.

i) Tread separation (inside tire).

j) Valve leaks.